Intel Pentium OverDrive (R) Processors For The Packard Bell

Anthony Olszewski
COPYRIGHT 1997

Packard Bell Model Intel OverDrive (R) Processor
D 75 (PB420) [IntelDX2 66] PODP5V83
D 78 (PB420) [IntelDX2 66] PODP5V83
D 80 [IntelDX2 66] PODP5V83
D 85 [IntelDX2 66] PODP5V83
D 88 (PB420) [IntelDX2 66] PODP5V83
D 90 [IntelDX2 66] PODP5V83

Jumpers

Rev C system boards use a J40 jumper block, which Rev B lack. The Rev B is not compatible with Pentium OverDrive processors.

PODP5V83 BLOCK PINS/SWITCH ON/OFF DESCRIPTION
J34 1-2 ON Processor select
J34 3-4 OFF Processor select
J34 5-6 ON Processor select
J40 1-2 ON Processor select
J40 3-4 OFF Processor select
J40 5-6 ON Processor select

Packard Bell Model Intel OverDrive (R) Processor
D 1725 [Intel486 SX-25] PODP5V83
D 1725 Plus (SX-25) [Intel486 SX-25] PODP5V83
D 1725 Plus (SX-33) [Intel486 SX-33] PODP5V83
D 30 (SX-33) [Intel486 SX-33] PODP5V83
D 30 Plus (SX-33) [Intel486 SX-33] PODP5V83
D 75 (PB440) [IntelDX2 66] PODP5V83
D 78 (PB440) [IntelDX2 66] PODP5V83
D 88 (PB440) [IntelDX2 66] PODP5V83
If the the original CPU is soldered directly to the motherboard, do not try to remove the factory-installed CPU! For these models, install the OverDrive processor into the empty processor socket. If the processor is removable from the socket (a PGA socket), take out the stock processor. Replace it with an Intel OverDrive processor.

Jumpers
PODP5V83 BLOCK PINS/SWITCH ON/OFF DESCRIPTION
J34 1-2 ON Processor select
J34 3-4 OFF Processor select
J34 5-6 ON Processor select
J40 1-2 ON Processor select
J40 3-4 OFF Processor select
J40 5-6 ON Processor select

Packard Bell Model Intel OverDrive Processor
Spectria 200 [486DX2-66] PODP5V83
PB 10CD [IntelSX2 50] PODP5V83
PB 20CD [IntelDX2 66] PODP5V83
PB 20CD Plus [IntelDX2 66] PODP5V83
Install the OverDrive processor into the empty processor socket. Systems with a series number (found on the FCCID sticker) that includes 450 or 470, will need an Intel interposer socket -- available from Packard Bell as part# 146506.

Jumpers
PODP5V83 BLOCK PINS/SWITCH ON/OFF DESCRIPTION
J25 2-3 ON Speed select
J28 2-3 ON
J29 2-3 ON (Not present on all systems)
J31 1-2 ON Processor select
J31 3-4 ON Processor select
J31 5-6 OFF Processor select
J32 3-5 ON CPU voltage
J32 4-6 ON CPU voltage

No OverDrive processor is available for these systems.
Packard Bell Model Intel OverDrive Processor
D 607 [Intel486 SX-20] PODP (not compatible)
D 607A (PB22/23) [Intel486 SX-20] PODP (not compatible)
400 TV [Intel486 SX-20] PODP (not compatible)
486 CDM [Intel486 SX-25] PODP (not compatible)
486 CDM/TV [Intel486 SX-25] PODP (not compatible)
D 1733 [Intel486 SX-25] PODP (not compatible)
D 1735 Multimedia [Intel486 SX-25] PODP (not compatible)
D 50 [IntelDX2 50] PODP (not compatible)
D 605 [Intel486 SX-20] PODP (not compatible)
D 605A [Intel486 SX-25] PODP (not compatible)
D 607A (PB400) [Intel486 SX-25] PODP (not compatible)
D 625 [Intel486 SX-25] PODP (not compatible)
D 630 [Intel486 SX-20] PODP (not compatible)
D 703A [Intel486 DX-33] PODP (not compatible)
D 703B [Intel486 DX-33] PODP (not compatible)
D 703C [Intel486 DX-33] PODP (not compatible)
D Series 1733 [Intel486 SX-25] PODP (not compatible)
PMX233 [Intel486 DX-33] PODP (not compatible)
PMX240 [Intel486 DX-33] PODP (not compatible)
PB 486DX/33 (PB23) [Intel486 DX-33] PODP (not compatible)
PB 2/50 [IntelDX2 50] PODP (not compatible)
PB 400DX/33 [Intel486 DX-33] PODP (not compatible)
PB 400ESX-202FF [Intel486 SX-20] PODP (not compatible)
PB 400SX-202FF [Intel486 SX-20] PODP (not compatible)
PB 400SX/25 [Intel486 SX-25] PODP (not compatible)
PB 425SX/4 [Intel486 SX-25] PODP (not compatible)
PB 425SX/8 [Intel486 SX-25] PODP (not compatible)
PB 430 [Intel486 SX-20] PODP (not compatible)
PB 470 [Intel486 SX-25] PODP (not compatible)
PB 485 (SX-20) [Intel486 SX-20] PODP (not compatible)
PB 485 (SX-25) [Intel486 SX-25] PODP (not compatible)
PB 486DX/33 (PB400) [Intel486 DX-33] PODP (not compatible)
PB 486DX2/334 [Intel486 DX-33] PODP (not compatible)
PB 486DX2/50 [IntelDX2 50] PODP (not compatible)
PB 486DX2/664 [IntelDX2 66] PODP (not compatible)
PB 486H [Intel486 SX-25] PODP (not compatible)
PB 486SX/33 [Intel486 SX-33] PODP (not compatible)
PB 486T 50 [IntelDX2 50] PODP (not compatible)
PB 486T 66 [IntelDX2 66] PODP (not compatible)
PB 495 [Intel486 SX-25] PODP (not compatible)
PB 495H [Intel486 SX-25] PODP (not compatible)
PB 515E [Intel486 SX-25] PODP (not compatible)
PB 525 [Intel486 SX-25] PODP (not compatible)
PB 525E [Intel486 SX-25] PODP (not compatible)
PB 550 [IntelDX2 50] PODP (not compatible)
PB 550Y [IntelDX2 50] PODP (not compatible)
PB 560 [IntelDX2 50] PODP (not compatible)
PB 580H [Intel486 SX-25] PODP (not compatible)
PB 580N [Intel486 SX-25] PODP (not compatible)
PB A440 [Intel486 DX-33] PODP (not compatible)
PB T50 [IntelDX2 50] PODP (not compatible)
PMX 250 [IntelDX2 50] PODP (not compatible)
PMX T-250 (PB400) [IntelDX2 50] PODP (not compatible)
PMX T-250 (PB401T) [IntelDX2 50] PODP (not compatible)
PMX T-250V [IntelDX2 50] PODP (not compatible)
PMX T-266 (PB400) [IntelDX2 66] PODP (not compatible)
PMX T-266 (PB401T) [IntelDX2 66] PODP (not compatible)
PMX220 [Intel486 SX-20] PODP (not compatible)
PMX220 H [Intel486 SX-25] PODP (not compatible)
PMX225 H [Intel486 SX-25] PODP (not compatible)
PMX230 [Intel486 DX-33] PODP (not compatible)

Packard Bell Model Intel OverDrive Processor
PB 1102 [Intel486 SX-25] PODP5V83
PB 1103 [Intel486 SX-25] PODP5V83
PB 1104 [Intel486 SX-25] PODP5V83
PB 1104H [Intel486 SX-25] PODP5V83
PB 1108 [Intel486 SX-25] PODP5V83
PB 1108H [Intel486 SX-25] PODP5V83
PB 1110 [Intel486 SX-25] PODP5V83
PB 1110H [Intel486 SX-25] PODP5V83
PB 1110SH [Intel486 SX-25] PODP5V83
PB 1120 [Intel486 SX-33] PODP5V83
PB 1120H Plus [Intel486 SX-33] PODP5V83
PB 1150H [Intel486 SX-25] PODP5V83
PB 117 [Intel486 SX-25] PODP5V83
PB 1270 [Intel486 SX-25] PODP5V83
PB 1270H [Intel486 SX-25] PODP5V83
PB 2001/66 [IntelDX2 66] PODP5V83
PB 2002 [Intel486 SX-25] PODP5V83
PB 480 [Intel486 SX-25] PODP5V83
PB 486DX/33 (PB420) [Intel486 DX-33] PODP5V83
PB 566 [IntelDX2 66] PODP5V83
PB 609 [Intel486 SX-25] PODP5V83
PB 610 (SX-25) (PB410) [Intel486 SX-25] PODP5V83
PB 610 (SX-33) [Intel486 SX-33] PODP5V83
PB 610H (SX-25) (PB410) [Intel486 SX-25] PODP5V83
PB 610H (SX-33) [Intel486 SX-33] PODP5V83
PB AT33 [Intel486 DX-33] PODP5V83

Jumpers
Rev C system boards use a J40 jumper block, which Rev B lack. The Rev B is not compatible with Pentium OverDrive processors.

PODP5V83 BLOCK PINS/SWITCH ON/OFF DESCRIPTION
J34 1-2 ON Processor select
J34 3-4 OFF Processor select
J34 5-6 ON Processor select
J40 1-2 ON Processor select
J40 3-4 OFF Processor select
J40 5-6 ON Processor select

Packard Bell Model Intel OverDrive Processor
PB 1020 [Intel486 SX-25] PODP5V83
PB 1030 [Intel486 SX-33] PODP5V83
PB 1120H [Intel486 SX-33] PODP5V83
PB 1120SH [Intel486 SX-33] PODP5V83
PB 1150 [Intel486 SX-25] PODP5V83
PB 1150 Plus [Intel486 SX-25] PODP5V83
PB 1150A Plus [Intel486 SX-25] PODP5V83
PB 1150H Plus [Intel486 SX-25] PODP5V83
PB 1150SH [Intel486 SX-25] PODP5V83
PB 1520 [Intel486 SX-33] PODP5V83
PB 1550 [Intel486 SX-25] PODP5V83
PB 1550C [IntelDX2 50] PODP5V83
PB 2008 [Intel486 SX-33] PODP5V83
PB 2011 [Intel486 SX-33] PODP5V83
PB 202 [Intel486 SX-33] PODP5V83
PB 2034 [Intel486 SX-33] PODP5V83
PB 2049 [IntelDX2 50] PODP5V83
PB 208 [Intel486 SX-25] PODP5V83
PB 208CD [Intel486 SX-25] PODP5V83
PB 220 [Intel486 SX-33] PODP5V83
PB 25 [Intel486 SX-25] PODP5V83
PB 26CD [Intel486 SX-25] PODP5V83
PB 323 [Intel486 SX-33] PODP5V83
PB 580 [Intel486 SX-33] PODP5V83
PB 580 Plus [Intel486 SX-33] PODP5V83
PB 581 [IntelDX2 50] PODP5V83
PB 590H [Intel486 SX-25] PODP5V83
PB 610 (SX-25) (PB430) [Intel486 SX-25] PODP5V83
PB 610H (SX-25) (PB430) [Intel486 SX-25] PODP5V83
PMX 225 [Intel486 SX-25] PODP5V83
If the the original CPU is soldered directly to the motherboard, do not try to remove the factory-installed CPU! For these models, install the OverDrive processor into the empty processor socket. If the processor is removable from the socket (a PGA socket), take out the stock processor. Replace it with an Intel OverDrive processor.

Jumpers
PODP5V83 BLOCK PINS/SWITCH ON/OFF DESCRIPTION
J34 1-2 ON Processor select
J34 3-4 OFF Processor select
J34 5-6 ON Processor select
J40 1-2 ON Processor select
J40 3-4 OFF Processor select
J40 5-6 ON Processor select

Packard Bell Model Intel OverDrive Processor
PRO [Intel486 DX-33] PODP5V83
PRO [Intel486 SX-25] PODP5V83
PRO [Intel486 SX-33] PODP5V83
PRO [IntelDX2 50] PODP5V83
PRO [IntelDX2 66] PODP5V83
P-PB [Pentium 60] PODP5V133
P-PB [Pentium 66] PODP5V133
P-PMX [Pentium 60] PODP5V133
P-PMX [Pentium 66] PODP5V133
P5-PRO [Pentium 60] PODP5V133
P5-PRO [Pentium 66] PODP5V133
No special installation steps required. Follow the instructions included with the OverDrive processor.